FixVault
Home › Oldsmobile › 1994 › Achieva SC, 2.3 D › Repair and Diagnosis › Brakes › Traction Control › Anti-Lock Brake System - Abs-VI › Removal & Installation › Abs Light Driver Module › Removal

Abs Light Driver Module: Removal

  1. Turn ignition off. Disconnect negative battery cable. On Achieva and Skylark, remove left instrument panel trim plate. Light driver is located to left of radio control, taped to harness. Connector is Light Green. Open connector and slide light driver circuit board out of connector. See Figure .
  2. On Grand Am, remove left instrument panel trim plate. Light driver is taped to instrument panel harness. Connector is Light Green. Open connector and slide light driver circuit board out of connector. See Figure .
About FixVault