One Mirror Does Not Operate In Left/Right Positions

(UP/DOWN POSITIONS OPERATE NORMALLY)

1. If left mirror does not operate, place mirror select switch in left position. Using a test light, backprobe mirror control switch connected connector, between terminals "B" (White wire) and "C" (Light Green wire, "D" body). Toggle mirror position switch to left position, and go to step 3).
2. If right mirror does not operate, place mirror select switch in right position. Using a test light, backprobe mirror control switch connected connector, between terminals "F" (Light Blue wire) and "G" (White wire). Toggle mirror position switch to left position, and go to next step.
3. If test light does not come on, check mirror control switch connector. If connector is okay, replace mirror control switch. If test light comes on, backprobe suspect outside mirror connector between terminals "A" (Light Blue wire) and "B" (White wire). Toggle mirror control switch to left position, and go to next step. If test light comes on, check mirror control switch connector. If connector is okay, replace mirror control switch.
4. If test light does not come on, check for an open in circuit between suspect outside mirror connector terminal "A" (Light Blue wire) and mirror control switch. If circuit is okay, check for an open in circuit between suspect outside mirror connector terminal "B" (White wire) and mirror control switch. Repair circuits as needed.