Transmitter Programming
WARNING: This page is about a different car, the 1995 Chevrolet Lumina APV. However, it is still accessible from the selected car via links, so may be relevant.
- Move all transmitters out of antenna range. Turn ignition off. Turn front door key lock to unlock position. Press programming switch. Diagnostic light will flash "one" continuously.
- Bring first transmitter into antenna range. When transmitter code is stored, diagnostic light will be on continuously. Move first transmitter out of antenna range.
- Diagnostic light will flash "two" continuously. Bring second transmitter into antenna range. When transmitter code is stored, diagnostic light will be on continuously. If a third transmitter is to be programmed, repeat step 3).
- To exit programming mode, move all transmitters out of antenna range. Open and close a front door. Diagnostic light will turn off, and remain off until a new programming mode is started.