FixVault

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Ball Joint Stud Nut (1) 40 (54)
Control Arm Pivot
Bolt (if torquing from bolt side) 134 (182)
Nut (if torquing from nut side) 85 (115)
Hub & Bearing Assembly-To-Knuckle Bolt 52 (71)
Stabilizer Bar
Bar-To-Knuckle Bracket Bolt/Nut 13 (18)
Bar Link-To-Bracket Bolt 35 (47)
Bar Link Bracket-To-Frame Bolt 14 (19)
Bar-To-Link Bolt 17 (23)
Strut-To-Knuckle Nut 140 (190)
Strut-To-Upper Mount Nut 35 (47)
Suspension Adjusting Link Nut
Adjusting Lock Nut 48 (65)
At Control Arm 63 (85)
At Knuckle 33 (45)
Wheel Lug Nut 100 (136)
(1) Tighten to specification (minimum). Tighten further, but only as far as necessary to align cotter pin holes. DO NOT loosen nut to align holes.