FixVault
Home › Oldsmobile › 2000 › Intrigue GL › Repair and Diagnosis › Steering › Steering Wheel And Steering Column - Tilt › Repair Instructions › Steering Wheel Control Switch Assembly Replacement › Removal Procedure

Removal Procedure

  1. Disable the S.I.R. system. Refer to DISABLING SYSTEM in S.I.R.
  2. Remove the inflatable restraint steering wheel module. Refer to REMOVAL DRIVER-SIDE in S.I.R.
    Fig 1: Removing/Installing Steering Wheel Control Switch
    GM652097Courtesy of GENERAL MOTORS CORP.
  3. Remove the screws from the steering wheel control switch.
    Fig 2: Removing/Installing Electrical Connector
    GM652098Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the electrical connector from the steering wheel control switch.
  5. Remove the steering wheel control switch from the steering wheel.
About FixVault