Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.

Install the bulb(s) to the high-mounted stop lamp socket(s).
Install the lamp socket(s) to the high-mounted stop lamp, then rotate clockwise to secure.

Fig 1: Installing Lamp Sockets To High Mounted Stop Lamp & Bulbs
Courtesy of GENERAL MOTORS CORP.
Position the high-mounted stop lamp vent to the rear window panel.

Fig 2: Positioning High Mounted Stop Lamp Vent To Rear Window Panel
Courtesy of GENERAL MOTORS CORP.
Install the high-mounted stop lamp vent to the underside of the rear window panel pressing into place until fully seated.
Close the rear compartment.

Fig 3: Installing High Mounted Stop Lamp Vent
Courtesy of GENERAL MOTORS CORP.