FixVault
Home › Oldsmobile › 2002 › Aurora 3.5 H › Repair and Diagnosis › Body & Frame › Seats › Power Seat System › Repair Instructions › Heated Seat Control Module Replacement - Front › Installation Procedure

Installation Procedure

  1. Position the heated seat module (2) to the bottom of the seat cushion.
    CAUTION: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the heated seat module fasteners.

    Tighten 

    Tighten the fasteners to 2 N.m (18 lb in).

  3. Install the electrical connectors (3) to the heated seat module (2).
    4. Fig 1: Locating Heated Seat Module, Fasteners & Electrical Connectors
    G01803936Courtesy of GENERAL MOTORS CORP.
  4. Ensure the wiring harness is positioned in the same location in which it was removed.
  5. Install the seat cushion. Refer to Seat Cushion Replacement - Front  .
  6. Enable the SIR system. Refer to ACTIVATING SYSTEM in SIR.
About FixVault