Perimeter Lighting Timer

Continue with the following steps in order to program the perimeter lighting timer:

1. Select Set Options.
2. Select Driver #1 Perimeter Light Timer or Driver #2 Perimeter Light Timer.
3. Select one of the following choices:
   • Delay 5 Seconds
   • Delay 10 Seconds
   • Delay 15 Seconds
   • Delay 20 Seconds
   • Delay 25 Seconds
   • Delay 30 Seconds
4. Press the ENTER button to select a setting. An asterisk appears beside the current setting. You must turn the current setting OFF before you can turn another one ON.