FixVault
Home › Oldsmobile › 2002 › Aurora 4.0 C › Repair and Diagnosis › Body & Frame › Body, Cab Control Systems › Body Control System › Repair Instructions › Rear Integration Module Replacement › Installation Procedure

Installation Procedure

  1. Install the rear integration module (RIM).
  2. Connect the RIM electrical connectors (3).
  3. Install the RIM (2) with the push pin retainers (1).
    4. Fig 1: Installing RIM
    G01801271Courtesy of GENERAL MOTORS CORP.
  4. Reposition the rear seat back insulator.
  5. Install the rear seat back. Refer to SEAT BACK REPLACEMENT -- REAR .
  6. Install the rear seat belt buckle anchor bolts.
  7. Install the rear seat cushion. Refer to SEAT CUSHION REPLACEMENT -- REAR .
  8. Reprogram the RIM. Refer to Body Control Module (BCM) Programming/RPO Configuration (DIM)  or Body Control Module (BCM) Programming/RPO Configuration (IPM)  or Body Control Module (BCM) Programming/RPO Configuration (RIM)  .
About FixVault