Installation Procedure
- Install the BPMV bracket (4) to the wheel house.NOTE: Refer to FASTENER NOTICE
- Install the 3 BPMV bracket nuts (1,2,3) to the studs on the BPMV bracket (4).
Tighten
Tighten the 3 BPMV bracket nuts to 10 N.m (7 lb ft).
- Install the BPMV and EBCM as an assembly to the BPMV bracket. Refer to Brake Pressure Modulator Valve (BPMV) Replacement .
- Turn the ignition switch to the ON position.
- Perform the Diagnostic System Check - ABS .