Removal Procedure

Remove the inside handle bezel from the door trim pad. Refer to HANDLE BEZEL REPLACEMENT -- INSIDE in Doors.
Remove the front door switch plate. Refer to FRONT DOOR SWITCH REPLACEMENT in Doors.
Disconnect the electrical connector for the memory seat switch through the power door switch opening in the door trim panel.

Fig 1: Removing Memory Seat Switch (1 Of 2)
Courtesy of GENERAL MOTORS CORP.
Remove the memory seat switch from the inside handle bezel by releasing the tabs with a small flat bladed tool.
Gently remove the electrical wiring for the memory seat switch from behind the door trim panel.

Fig 2: Removing Memory Seat Switch (2 Of 2)
Courtesy of GENERAL MOTORS CORP.