Installation Procedure

Install the outer tie rod (3) to the inner tie rod (1). Do not tighten the jam nut (2).

Fig 1: Installing Outer Tie Rod To Inner Tie Rod
Courtesy of GENERAL MOTORS CORP.
Install the outer tie rod (1) to the steering knuckle (2).

Fig 2: Installing Outer Tie Rod To Steering Knuckle
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to FASTENER NOTICE .
Install the outer tie rod retaining nut (3).

Fig 3: Installing Outer Tie Rod Retaining Nut
Courtesy of GENERAL MOTORS CORP.

Tighten

Tighten the outer tie rod retaining nut to 30 N.m (22 lb ft) plus an additional 180 degrees.
Install the tire and wheel. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION in Tires and Wheels.
Lower vehicle.
Adjust the toe alignment. Refer to FRONT TOE ADJUSTMENT in Wheel Alignment.