Shift Cable: Installation
- Install the shift control cable to the vehicle. See Figure .
- Slide the transaxle range selector cable (1) fully into the console until it snaps into place.
- Connect the transaxle range selector cable terminal to the shift lever pin. See Figure .
- Install the console trim plate. See appropriate SHIFT INTERLOCK SYSTEMS article.
- Install the left console trim panel.
- Insert the transaxle range selector cable into the bracket. See Figure .
- Connect the transaxle range selector cable terminal to the transaxle manual shift lever pin.
- Insert the retainer to the shift cable mechanism. See Figure .
- Adjust the shift cable. See SHIFT CABLE under ADJUSTMENTS.