FixVault
Home › Oldsmobile › 2003 › Bravada AWD › Repair and Diagnosis › Body & Frame › Seats › Seat System › Repair Instructions › Seat Switch Replacement - Power › Installation Procedure

Installation Procedure

  1. Connect the electrical connector to the switch.
    2. Fig 1: Seat Switch Power
    G01641836Courtesy of GENERAL MOTORS CORP.
  2. Install the seat switch to the seat bezel assembly. Verify that the retaining tabs are fully seated.
  3. Install the buttons on the switch.
  4. Install the switch bezel assembly to the seat assembly. Refer to SEAT SWITCH BEZEL REPLACEMENT  .
About FixVault