FixVault
Home › Oldsmobile › 2003 › Bravada AWD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission Servicing › Removal & Installation › Control & Shift Solenoids › Installation

Control & Shift Solenoids: Installation

  1. Install the 3-2 control solenoid. Install the 3-2 control solenoid retainer. See Figure .
  2. Install the 1-2 and 2-3 shift solenoids. Install the 1-2 and 2-3 shift solenoid retainers.
  3. Install the pressure control solenoid. Ensure the electrical tabs are facing outboard. See Figure .
  4. Install the pressure control solenoid retainer and retaining bolt. Tighten the pressure control solenoid retaining bolt to specification. See TORQUE SPECIFICATIONS  .
  5. Connect the internal wiring harness electrical connectors to the following components:
    • Transmission fluid pressure switch (1). See Figure .
    • 1-2 shift control solenoid (2).
    • 2-3 shift control solenoid (3).
    • Pressure control solenoid (4).
    • TCC PWM solenoid (5).
    • 3-2 control solenoid (6).
  6. Install the 1-2 accumulator. See ACCUMULATOR ASSEMBLY  .
  7. Install the transmission oil pan and filter. See DRAINING & REFILLING  under LUBRICATION.
  8. Fill transmission with appropriate fluid to proper level. See LUBRICATION  .
About FixVault