Installation Procedure
Courtesy of GENERAL MOTORS CORP.
- Install the moveable roof panel guide and cable assembly (1) into the channel of the moveable roof panel frame assembly (2).
Courtesy of GENERAL MOTORS CORP.
- Slide the roof panel guide forward until it is engaged in the channel of the roof panel frame assembly.
- Slide the rear latch assembly (2) forward into the frame assembly.
Courtesy of GENERAL MOTORS CORP.
- Slide the rear latch levers (1) into the channel, and position the latch lever (1) between the notches of the roof panel guide (2).
Courtesy of GENERAL MOTORS CORP.
- Slide the roof panel guide (1) forward until it is positioned at the notch in the channel of the moveable roof frame assembly.
- Install the roof panel support slide (2) onto the roof panel guide (1).
Courtesy of GENERAL MOTORS CORP.
- Slide the roof panel guide (1) and support slide (2) assembly forward into track on the moveable roof panel frame assembly.
- Install the moveable roof panel latch spring. Refer to Moveable Roof Panel Latch Spring Replacement - Rear .
- Install the moveable roof panel rear locator. Refer to Moveable Roof Panel Locator Replacement - Rear .
- To ensure proper timing of the roof panel, slide the roof panel guide(s) rearward until it stops against the rear locator assembly.
- Install the moveable roof panel actuator/motor. Refer to Moveable Roof Panel Motor/Actuator Replacement .
- Install the moveable roof panel bracket. Refer to Moveable Roof Panel Guide Bracket Replacement .
- Install the moveable roof panel. Refer to Moveable Roof Panel Assembly Replacement .
- Perform a roof learn cycle by depressing the roof switch forward until the roof panel is fully opened, then depress the roof switch rearward until the roof panel is fully closed.
- Inspect for proper operation of the moveable roof panel and end gate window.