Removal Procedure
- Remove the door trim panel. Refer to Trim Panel Replacement - Side Front Door .
- Remove the speaker. Refer to Speaker Replacement - Front Door
in Entertainment.
- Remove the water deflector. Refer to Water Deflector Replacement - Front Door .
- Loosen the regulator window carrier bolts.
- Raise and support the window.
Courtesy of GENERAL MOTORS CORP.
- Disconnect the electrical connector from the regulator motor.
- Loosen the upper 2 bolts that retain the regulator assembly to the door.
- Remove the remaining 3 bolts that retain the window regulator assembly and the motor to the door.
- Lift the regulator assembly upward in order to release the upper 2 bolts.
- Rotate the upper portion of the regulator assembly forward.
- Beginning with the lower portion, remove the regulator assembly through the door opening.
- Place the regulator assembly on a prepared surface.
- Remove the upper 2 bolts from the regulator assembly.