FixVault
Home › Oldsmobile › 2004 › Bravada AWD › Repair and Diagnosis › External Pages › Different car › Section 1736 (Lighting Systems) › Repair Instructions › Ambient Light Sensor Replacement › Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the windshield garnish moldings. Refer to Garnish Molding Replacement - Windshield Pillar in Interior Trim.
  2. Remove the trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper in Instrument Panel Gages and Console.
    3. IMPORTANT: Cover the windshield defrost vents with clean shop rags.
    Fig 1: View Of Instrument Panel (I/P) Upper Trim Pad
    GM718025Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connector from the sensor.
    4. Fig 2: Locating Ambient Light Sensor
    GM729432Courtesy of GENERAL MOTORS CORP.
  4. In order to remove the sensor from the trim pad, rotate the sensor counter-clockwise 1/4 turn.
  5. Remove the sensor from the trim pad.
About FixVault