FixVault
Home › Oldsmobile › 2004 › Bravada AWD › Repair and Diagnosis › External Pages › Different car › Section 1736 (Lighting Systems) › Repair Instructions › Headlamp Switch Replacement › Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Headlamp Switch Electrical Connectors
    GM729433Courtesy of GENERAL MOTORS CORP.
  1. Position the headlamp switch near the access hole.
  2. Connect the electrical connectors to the headlamp switch.
    3. Fig 2: Headlamp Switch And Retaining Tabs
    GM729434Courtesy of GENERAL MOTORS CORP.
  3. Install the headlamp switch to the IP. Ensure that the retaining tabs are fully seated.
  4. Install the left IP access cover.
About FixVault