FixVault
Home › Oldsmobile › 2004 › Bravada AWD › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Pulley Replacement (5.3L) › Installation Procedure

Installation Procedure

  1. Position the power steering pump pulley to the end of the power steering pump shaft.
  2. Using the J 25033-C  , install the power steering pump pulley to the power steering pump. See Special Tools and Equipment .
    Fig 1: View Of Power Steering Pump Pulley Installer
    GM643361Courtesy of GENERAL MOTORS CORP.
    3. Fig 2: Checking Power Steering Pump Pulley Installed Depth
    GM245012Courtesy of GENERAL MOTORS CORP.
  3. Install the power steering pump pulley (1) flush against the end of the power steering pump shaft (2), with an allowable variance of 0.25 mm (0.010 in).
  4. Install the power steering pump. Refer to Power Steering Pump Replacement (5.3L)  or Power Steering Pump Replacement (4.2L) .
About FixVault