FixVault
Home › Oldsmobile › 2004 › Bravada AWD › Repair and Diagnosis › Suspension › Front Suspension › Front Suspension System › Repair Instructions › Shock Module Yoke Replacement › Installation Procedure

Installation Procedure

  1. Install the shock module yoke to the lower control arm stud and shock absorber.
    Fig 1: View Of Shock Module Yoke To Shock Absorber Pinch Bolt & Nut
    GM744322Courtesy of GENERAL MOTORS CORP.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the shock module yoke to shock absorber pinch bolt and nut.

    Tighten:  Tighten the shock module yoke to shock absorber pinch bolt to 70 N.m (52 lb ft).

    3. Fig 2: Removing/Installing Shock Module Yoke Lower Mounting Nut
    GM744328Courtesy of GENERAL MOTORS CORP.
  3. Install the shock module yoke to lower control arm mounting nut.

    Tighten:  Tighten the shock module yoke to lower control arm mounting nut to 110 N.m (81 lb ft).

  4. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  5. Lower the vehicle.
About FixVault