Tailgate Lock System

Battery must be fully charged and solenoid properly adjusted. Remove wiring connector at tailgate solenoid. Connect a test light to Pink lead (Fury & Coronet) or Orange lead (Gran Fury, Monaco & Chrysler) at connector in wiring harness. With ignition switch "ON", test light should light. Move tailgate unlock switch to unlock position and hold, light should go out. Move test light to Orange lead (Fury & Coronet) or Pink lead (Gran Fury, Monaco & Chrysler) in connector, test light should go out. Actuate tailgate unlock switch and test light should light. To determine if solenoid is operating properly, connect a hot lead to Orange wire in solenoid connector, solenoid link should extend. Move hot lead to Pink wire and solenoid should retract.