Section 9 (Anti-Lock Brake System): Overhaul: Modulator
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1988 Chrysler Conquest, 1987 Chrysler Conquest, 1986 Plymouth Conquest, 1986 Dodge Conquest, and 1985 Plymouth Conquest. However, it is still accessible from the selected car via links, so may be relevant.
- To overhaul modulator, refer to Fig. Fig 1 . Ensure overhaul is completed in a clean working area. Remove hydraulic cylinder from modulator. Remove plunger and dust seal. Remove snap ring and seal cup.
- While holding portion painted Black , remove bleeder cap and "O" ring. Remove bushing and choke valve piston. Remove "O" ring from choke valve piston. Check all parts for wear or damage.
- To reassemble, reverse disassembly procedure. When installing valve cap, gap between cap and body should be .02-.04" (.5-1.0 mm). Coat all parts with Mopar Brake Fluid (2933249) before installing.