Engine Controls - Tests W/O Codes - BCC

• Model Identification
• Diagnostic Test Procedure
• CCD Bus Testing
• Setting Compass
  • Please Read This First *
  • Compass/Temperature Module
  • Electronic Vehicle Information Center (EVIC)
• Component Location
• Traveler System Test Flow Charts (A Body)
• Test 1: Using DRB-II To Test Traveler & CCD Bus
• Test 2: Checking Traveler For No Response Message
• Test 3: Checking Traveler Buttons & Operation
• Test 4: Checking Traveler For Fuel Sensor Input
• Test 5: Checking Eng Controller For CCD Bus Communication
• Test 6: Checking Traveler Illumination
• Test 7: Diagnosing CCD Bus System
• Test 8: Repair CCD Bus System For Short To Bat
• Test 9: Repair CCD Bus System Short To 5 Volts
• Test 10: Repair CCD Bus System For Short To GRN
• Test 11: Repair CCD Bus SYS, Bus (+) & Bus (-) Shorted Together
• Test 12: Testing CCD Bus System
• Test 13: Check For No Response From Traveler
• Test 14: Check For No Response From Engine Controller
• Test 15: CCD Bus SYS For Not Receiving Bus Messages Correctly
• Test 16: Check Eng Controller For Bus Operation
• Test 17: Repair DRB-II For Blank Screen
• Test 18: Testing DRB-II For Proper Operation