Front Wheel Speed Sensor: Removal

Raise and securely support vehicle. Remove wheel and tire assembly. Remove screw and clip securing sensor harness cable to fender shield. Carefully pull sensor harness grommet from fender shield. DO NOT pull on sensor harness cable. Unplug sensor connector from engine compartment harness. Remove retainer clip from bracket slot on strut. Remove harness cable and grommets from retainer bracket slot.
On steering knuckle, remove sensor retaining screw. Carefully remove sensor by pulling straight out from steering knuckle. If sensor is stuck or frozen/corroded in place, DO NOT use pliers to remove. Use hammer and punch to LIGHTLY tap edge of sensor ear, rocking sensor from side to side until it is free enough to be pulled out.