FixVault

C-Chart Identification/Availability

The following table lists only those C-charts available for this engine, as well as their identifications.

The component system diagnostic charts (C-charts) are used when no trouble codes have been set but one or more of the scan data values are not within typical ranges. Also, many times these charts can be used as component or subsystem functional checks.

These charts are not contained in this article. They can be found in the appropriate article in the ENGINE PERFORMANCE section.

C-CHART IDENTIFICATION/AVAILABILITY

Chart Identification/Purpose
C-1 ECM Replacement Check (ECM Quad Driver [QDR] Check)
C-1A Park Neutral Switch Diagnosis (With A/T Only)
C-1D Manifold Absolute Pressure (MAP) Output Check
C-1E Power Steering Pressure Switch (PSPS) (With P/S Only)
C-2C Idle Air Control (IAC) Valve
C-4D-1 "DIS" Misfire AT IDLE
C-4D-2 "DIS" Misfire UNDER LOAD
C-7 Exhaust Gas Recirculation (EGR) Valve Check (Non-ECM Controlled)
C-8A Torque Convertor Clutch (TCC) Circuit (With A/T Only)
C-8B Shift Light Check (With M/T Only)
C-10 A/C Clutch Control
C-12 Coolant Fan Control Circuit Diagnosis
C-16 ECM Controlled "Temp" Light Circuit