Performance Tests: Notes
NOTE:
Shift speed tables reference throttle angle percent and output shaft speed. Both conditions are monitored using scan tool. Shift speed tables apply when transmission is in "D" (Overdrive) position while vehicle is driven in 4 forward gears. Ensure vehicle speed listed in road test procedures corresponds with output shaft speed indicated in shift speed tables. Upshifts and downshifts should occur at specified output shaft speed noted in shift speed tables. Warm up information in shift speed tables applies to open loop operation. Before road testing vehicle, engine and transmission must be at operating temperature. Torque converter clutch will not engage if engine coolant has not reached operating temperature.