FixVault
Home › Pontiac › 2000 › Grand Prix GTP, 4D Sedan › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Anti-Theft System › Programming › Programming CTD Sensor, Arming & Disarming Modes

Programming CTD Sensor, Arming & Disarming Modes

  1. Turn instrument panel dimmer switch to OFF position. Turn ignition switch to LOCK position. Remove MALL PGM fuse located in instrument panel fuse block. Turn ignition switch to ACC position. Seat belt warning light will flash and chime will sound 4 times to indicate BCM type 4 (CTD) and that BCM is in programming mode.
  2. To change CTD shock sensor mode, turn headlight switch from OFF to PARK position, and then back to OFF position. The seat belt warning light will flash and chime will sound to indicate current mode. When Mode 4 is reached, mode 1 will be repeated.
    NOTE: Programming arming and disarming modes requires an additional key to operate door lock cylinder while ignition switch is in ACC position.
  3. To change arming and disarming modes, insert key in door lock and turn key to unlock position for one second, and then back to center position. The seat belt warning light will flash and chime will sound to indicate current customization mode. When mode 3 is reached, mode 1 will be repeated.
  4. To exit and save current programming mode, turn ignition off. Replace MALL PGM fuse.
About FixVault