FixVault
Home › Pontiac › 2001 › Aztek Base, AWD › Repair and Diagnosis (Single Page) › Transmission › Automatic Trans › Automatic Transaxle Diagnosis - 4T65-E › Removal & Installation › Powertrain Control Module › Removal

Powertrain Control Module: Removal

  1. Disconnect the negative battery cable.
  2. Remove the left sheet metal diagonal brace.
  3. Remove the air cleaner assembly cover and lift the PCM from the assembly. See Figure .
  4. Disconnect the harness connectors from the PCM.
  5. Remove the PCM from the engine compartment.
About FixVault