Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Install the jounce bumper. The 15 series utilities are snap fit.

Fig 1: Installing The Jounce Bumper
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the jounce bumper bolt.
Tighten: Tighten the bolt to 32 N.m (24 lb ft).
Remove the safety stands.
Lower the vehicle.