FixVault

Scan Tool Data List

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

The SIR Scan Tool Data List contains all the restraint system related parameters that are available on the scan tool. The parameters in the list are arranged in alphabetical order. The column, "Data List," indicates the location of the parameter within the scan tool menu selections.

Use the SIR Scan Tool Data List as directed by a diagnostic table or in order to supplement the diagnostic procedures. Begin all of the diagnostic procedures with the SIR Diagnostic System Check. Use the SIR Scan Tool Data List after the following are determined:

The Typical Data Values are obtained from a properly operating vehicle under the conditions specified in the first row of the Scan Tool Data List table. Comparison of the parameter values from the suspect vehicle with the Typical Data Values may reveal the source of the customer concern.

SIR Scan Tool Data List

Scan Tool Parameter Data List Units Displayed Typical Data Value
Ignition ON/Engine OFF/Driver Seat Belt Buckled
8-Digit GM Part Number Module 2 Information 8-digit number Varies
Calibration ID Module 1 Information 4-digit number Varies
Component Serial #8 - 11 Module 2 Information 4-digit number Varies
Component Serial #12 Module 2 Information 1-digit number Varies
Driver Seat Belt A/D Data Volts 12 volts
Driver Seat Belt Status Inputs Buckled/Unbuckled Buckled
Driver Side Impact Sensor ID Module 1 Information 2-digit number Varies
Ignition Voltage Data Volts 12 volts
Julian Date of Build Module 1 Information 3-digit number Varies
Passenger Side Impact Sensor ID Module 1 Information 2-digit number Varies
PROM ID Module 1 Information 4-digit number Varies
Vin Information Vin Information Number Varies
Year Module Built Module 1 Information 4-digit number Varies