Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Remove the battery. Refer to Battery Replacement in Engine Electrical.
Drain the washer solvent from the washer solvent container.

Fig 1: View Of Washer Solvent Container Level Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the washer solvent container level sensor electrical connector.

Fig 2: View Of Washer Solvent Container Components

Courtesy of GENERAL MOTORS CORP.

Disconnect the rear washer pump electrical connector if equipped.
Disconnect the washer hose from the rear washer pump if equipped.

Fig 3: Identifying Front Washer Pump Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the front washer pump electrical connector.
Disconnect the front washer hose from the front washer pump.

Fig 4: Locating Washer Solvent Container Screws

Courtesy of GENERAL MOTORS CORP.

Remove the washer solvent container screws.
Remove the washer solvent container from the vehicle.