Section 11 (Manual Transmission Clutches): Bleeding
WARNING: This page is about a different car, the 2001 Chevrolet Tracker and 2000 Chevrolet Tracker. However, it is still accessible from the selected car via links, so may be relevant.
Attach hose to bleeder fitting located on clutch slave cylinder, next to hydraulic line. Submerge other end of hose in container half full of clean brake fluid. Fill reservoir with DOT 3 brake fluid. Open bleeder fitting. Have assistant press clutch pedal to full-release position. Close bleeder fitting. Release clutch pedal. Repeat until air bubbles no longer emerge from hose. Refill reservoir.