FixVault
Home › Pontiac › 2001 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 1111 (Disc Brake System) › Repair Instructions › Disc Brake Hardware Replacement - Rear › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Brake Caliper And Caliper Bracket
    GM178630Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Brake Dust Caution in Cautions and Notices.
  1. Remove the brake caliper from the mounting bracket and support the brake caliper (2) with heavy mechanic's wire (1), or equivalent. It is not necessary to disconnect the hydraulic brake flexible hose from the caliper. Refer to Brake Caliper Replacement - Rear .
    2. Fig 2: View Of Brake Pads, Brake Pad Retainers, & Caliper Bracket
    GM727742Courtesy of GENERAL MOTORS CORP.
  2. Remove the brake pads (2) from the brake caliper bracket (1).
  3. Remove the brake pad retainers (1) from the brake caliper bracket (3).
  4. Remove the brake caliper bracket (3). Refer to Brake Caliper Bracket Replacement - Rear .
  5. Mount the brake caliper bracket (3) in a vise.
About FixVault