FixVault
Home › Pontiac › 2001 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 1244 (Interior Trim) › Repair Instructions › Headliner Replacement (Aztek) › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Aztek and 2002 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the headliner to the roof through the rear of the vehicle.
  2. Push the headliner rearwards in order to lock the headliner into place.
  3. Install the rear headliner push-in retainers.
  4. Reposition the liftgate weather-strips.
  5. Install the left and the right lamps from the roof side rail. Refer to ROOF SIDE RAIL LAMP REPLACEMENT in Lighting Systems.
  6. Install the rear upper garnish molding. Refer to Garnish Molding Replacement - Rear Upper .
  7. Install the upper center pillar trim panel. Refer to Trim Panel Replacement - Upper Center Pillar .
  8. Install the rear headliner trim finishing molding.
    Fig 1: Installing Headliner Push-In Retainers & Headliner (Aztek)
    G01726712Courtesy of GENERAL MOTORS CORP.
  9. Install the overhead console. Console Replacement - Overhead (Rendezvous)  or Console Replacement - Overhead (Aztek) 
  10. Install the sunshades. Refer to Sunshade Replacement .
  11. Reposition the front door opening weather-strips.
  12. Install the windshield garnish moldings. Refer to Garnish Molding Replacement - Windshield Pillar .
About FixVault