FixVault
Home › Pontiac › 2001 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 1260 (Body Front End) › Repair Instructions › Wheelhouse Panel Replacement › Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Wheelhouse Panel & Push-In Retainers
    GM401885Courtesy of GENERAL MOTORS CORP.
  1. Remove the push-in retainers (2) from the wheelhouse panel.
    2. Fig 2: Removing Retainers From Front Fascia
    GM800541Courtesy of GENERAL MOTORS CORP.
  2. Remove the retainers (2) from the front fascia (1). If applicable.
  3. Remove the top clips retaining the harness to the top of the wheelhouse panel.
  4. Remove the wheelhouse panel from the wheelhouse.
About FixVault