FixVault
Home › Pontiac › 2001 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 1364 (Wiper System & Washer System) › Repair Instructions › Wiper Blade Element Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Replace the wiper blade element if it is removed from the wiper blade.
  1. Remove the wiper blade from the wiper arm. Refer to Wiper Arm Blade Replacement   . 
  2. Remove the bottom claws (2) of the wiper blade (1) from the notches in the wiper blade element (3).
  3. Pull the wiper blade element (3) out through the wiper blade claws (2).
    Fig 1: Wiper Blade Element
    G01577384Courtesy of GENERAL MOTORS CORP.
About FixVault