Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Place the console on the bracket.
Connect all the wire connectors.
NOTE: Refer to FASTENER NOTICE .
Install the 6 console retaining bolts (1) to the I/P extension.
Tighten

Tighten the 6 retaining bolts to 1.6 N.m (14 lb in).
Install the console lid and bin assembly. Refer to Console Storage Bin Replacement (Expect Pro) or Console Storage Bin Replacement (Pro) .
Install the cupholder assembly. Refer to Cupholder Replacement (Luxury) or Cupholder Replacement (Non-Luxury) or Cupholder Replacement (Rear) or Cupholder Replacement (Pro) .

Fig 1: Console (Pro)
Courtesy of GENERAL MOTORS CORP.