FixVault
Home › Pontiac › 2001 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 1422 (Power Seat System) › Repair Instructions › Seat Switch Replacement - Power › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Aztek and 2002 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the outer trim panel from the front seat cushion. Refer to Seat Cushion Outer Trim Panel Replacement - Front Seat .
  2. Use a small flat-bladed tool to release the retainers which hold the power seat switch to the outer trim panel.
    Fig 1: Releasing Power Seat Switch To Outer Trim Panel Retainers
    G01722580Courtesy of GENERAL MOTORS CORP.
  3. Remove the power seat switch from the outer trim panel.
    Fig 2: Removing Power Seat Switch
    G01722581Courtesy of GENERAL MOTORS CORP.
  4. Remove the power seat switch harness from the front seat support.
    Fig 3: Removing Power Seat Switch Harness
    G01722582Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the electrical connector from the power seat switch.
  6. Remove the power seat switch.
    Fig 4: Disconnecting Power Seat Switch Electrical Connectors
    G01722583Courtesy of GENERAL MOTORS CORP.
About FixVault