FixVault
Home › Pontiac › 2001 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 1437 (HVAC Systems - Automatic) › Repair Instructions › Inside Air Temperature Sensor Replacement › Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Inside Air Temperature Sensor
    GM675994Courtesy of GENERAL MOTORS CORP.
  1. Install the inside air temperature sensor to the headliner.
    2. Fig 2: View of Air Temperature Sensor Electrical Connector
    GM675996Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connector to the inside air temperature sensor.
  3. Install the screws to the headliner.
  4. Install the left sunshade. Refer to SUNSHADE REPLACEMENT .
  5. Install the left center pillar garnish molding. Refer to GARNISH MOLDING REPLACEMENT - CENTER PILLAR .
  6. Install the left center assist handle. Refer to ASSIST HANDLE REPLACEMENT - REAR .
  7. Install the left windshield garnish molding. Refer to GARNISH MOLDING REPLACEMENT - WINDSHIELD PILL .
About FixVault