FixVault
Home › Pontiac › 2001 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 1437 (HVAC Systems - Automatic) › Repair Instructions › Inside Air Temperature Sensor Replacement › Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left windshield garnish molding. Refer to GARNISH MOLDING REPLACEMENT - WINDSHIELD PILLAR .
  2. Remove the left center pillar assist handle. Refer to ASSIST HANDLE REPLACEMENT - REAR .
  3. Remove the left center pillar garnish molding. Refer to GARNISH MOLDING REPLACEMENT - CENTER PILLAR .
  4. Remove the left sunshade. Refer to SUNSHADE REPLACEMENT .
  5. Remove the retaining screws from the headliner.
  6. Gently pull down the headliner.
  7. Remove the inside air temperature sensor from the headliner.
    8. Fig 1: View of Air Temperature Sensor Electrical Connector
    GM675996Courtesy of GENERAL MOTORS CORP.
  8. Disconnect the electrical connector from the inside air temperature sensor.
    9. Fig 2: View of Inside Air Temperature Sensor
    GM675994Courtesy of GENERAL MOTORS CORP.
  9. Remove the inside air temperature sensor from the headliner.
About FixVault