Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Instrument Panel (I/P) Dimmer Switch

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the switch assembly on to the bezel and install the fasteners.
Tighten: Tighten the fasteners to 2.5 N.m (22 lb in).
Install the I/P trim panel bezel. Refer to Instrument Panel Accessory Bezel Replacement .