FixVault
Home › Pontiac › 2001 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 1527 (Frame And Underbody) › Repair Instructions › Engine Splash Shield Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Engine Splash Shield
    GM929650Courtesy of GENERAL MOTORS CORP.
  1. Position the splash shield to the vehicle by sliding rearward and aligning holes.
  2. Install the splash shield to structure push-in retainers.
About FixVault