FixVault
Home › Pontiac › 2001 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 1552 (Cruise Control System) › Repair Instructions › Cruise Release Switch Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Cruise Brake Switch Harness Connector
    GM931299Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the cruise brake switch connector.
    2. Fig 2: View Of Cruise Brake Switch & Retainer
    GM926071Courtesy of GENERAL MOTORS CORP.
  2. Rotate the cruise brake switch counterclockwise and remove the cruise brake switch from the switch retainer.
    3. IMPORTANT: Depressing the brake pedal will allow easier access of the retainer locking tabs.
  3. Gently compress the locking tabs on the cruise brake retainer and remove the switch retainer from the brake pedal assembly.
About FixVault