Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Ensure that the vehicle is properly supported and squarely positioned. To help avoid personal injury when a vehicle is on a hoist, provide additional support for the vehicle on the opposite end from which the components are being removed.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

Fig 1: View Of Muffler & Marking The String On The Pipe

Courtesy of GENERAL MOTORS CORP.

Obtain a piece of (non-stretchable) string 135 mm (5.3 in) long. Starting from the muffler, place the string along the pipe. Mark the end of the string on the pipe.

NOTE: Always use a chain cutter to cut the stainless steel pipe. A torch leaves a rough edge and may warp the pipe.

Using a SA9168NE (or equivalent) cut the pipe on the mark. See Special Tools .

Fig 2: Positioning Service Muffler & Tailpipe Assembly

Courtesy of GENERAL MOTORS CORP.

Separate the muffler and tailpipe.
Remove the muffler and tailpipe.