FixVault
Home › Pontiac › 2001 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 554 (Rear Suspension System) › Repair Instructions › Trailing Arm › Installation

Trailing Arm: Installation

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the trailing arm to the trailing arm bracket. See Figure.
  2. Install the bolt and nut to the trailing arm and the trailing arm bracket. Tighten the bolt to 105 N.m (77 lb ft).
  3. Install the trailing arm to the knuckle.
  4. Install the bolt and nut to the trailing arm and the knuckle. Tighten the nut to 70 N.m (52 lb ft) plus 65 degrees.
  5. Lower the vehicle.
About FixVault