FixVault
Home › Pontiac › 2001 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 643 (Body Rear End) › Repair Instructions › Window Replacement - Liftgate › Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Liftgate Window
    GM300373Courtesy of GENERAL MOTORS CORP.
  1. Close the liftgate.
  2. With an assistant, install the liftgate window to the liftgate by locating on pins and sliding to the right.
  3. Open the liftgate.
  4. With an assistant, install the new liftgate window hinge pin retainers.
  5. Close the liftgate and open and support liftgate window.
  6. Install the liftgate window struts. Refer to Strut Replacement - Liftgate Window .
  7. Connect the liftgate window defogger electrical connectors, if equipped.
  8. Remove the support and close window.
About FixVault