FixVault
Home › Pontiac › 2001 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 643 (Body Rear End) › Repair Instructions › Window Replacement - Liftgate › Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing Liftgate Window
    GM300373Courtesy of GENERAL MOTORS CORP.
  1. Open the liftgate window.
  2. Support the liftgate window.
  3. Disconnect the window defogger electrical connectors, if equipped.
  4. Remove the liftgate window struts. Refer to Strut Replacement - Liftgate Window .
  5. Open the liftgate in order to expose the liftgate window hinges.
  6. With an assistant, remove the liftgate window hinge pin retainers from the hinge pins.
  7. With an assistant, remove the liftgate window from the liftgate by sliding to the left.
About FixVault