Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.

Place forefinger under the lower rear edge of the switch plate.
Place thumb at the upper rear end of the switch plate along the curved surface.
While pulling rearward with forefinger and holding pressure with thumb, flex and lift the rear of the switch plate upwards.
Gently pry upwards to release the front edge of the trim plate from the door trim panel.
Insert a flat bladed tool under the front edge of the mirror and window switch pack.
Disconnect electrical connectors.

Fig 1: Removing Front Door Switch
Courtesy of GENERAL MOTORS CORP.
Remove the switch pack (2) by releasing the retaining tabs on the switch trim plate (1).

Fig 2: Removing Switch Pack
Courtesy of GENERAL MOTORS CORP.