FixVault
Home › Pontiac › 2001 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 712 (Door System, Mirror System & Window System) › Repair Instructions › Power Window Switch Replacement - Right Front › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use a flat bladed tool in order to remove the power window switch (3) from the door trim panel. Push in and lift up at the side of the switch.
  2. Disconnect the electrical connector (2) from the power window switch (3).
  3. Remove the power window switch bezel (1) from the power window switch (3) by releasing the retainers with the flat bladed tool.
    Fig 1: Removing Right Front Power Window Switch
    G01780244Courtesy of GENERAL MOTORS CORP.
About FixVault